Flute Laminator

Flute Laminator

SCFA-C18 Fully Auto

SCFA-C18 FULLY AUTO

Model No:SCFA-C18

This High Speed Machine Is Designed For Pasting Of Corrugated Liner With Duplex/Craft Paper. It Is Equipped With Side Lay And Vacuum Sucking Conveying System Making This Series Of Machine Fit For A Largar Range Of Paper. The Specia Lfeature Of This Machine Is Easy Operation And Low Maintenance. The Core Designed Rubber Roller Together With Knurled Steel Roller Enhances The Evenness Of Gluing, Strength Of Stickiness As Well As Lowering The Production Cost Balance Tested Rollers, Tight Assembling Technique, Plus Timing And Tooth Belt Driving Mechanic System Makes The Machine Runs At Low Noise With High Precision . The Machine Adops Automatic Glue Supply And Recyclable Glue Circulationg System. The Bottom Sheet For Ths Machine Can Be A,B,C, D,E,F, Flute Corrugated Sheet. It Can Do 3 Or 5 Ply Board To Sheet Lamination Or Board To Board Lamination. The Range For Top Paper Can Be 200-600 Gms With Top Paper Advance Or Alignment Function. Semi Auto Flute Laminator With Hand Feeding Of Top Paper Is Also Available.

SCFS-C17 Semi Auto

SCFS-C17 SEMI AUTO

Model No:SCFS-C17

Semi Automatic Flute Laminator Uses Vacuum-Sucking Paper Conveying Type For The Bottom Paper And Top Paper Is Fed Manually By Hand While The Operator Is Standing At The Side Of The Machine, This Type Of Design Has The Feature Of Easy Operation And Maintenance. The Core Designed Rubber Roller Together With Knurled Steel Roller Enhances The Evenness Of Gluing , Strength Of Stickness As Well As Lowering The Production Cost. Balance – Tested Rollers, Tight Assembling Technique Makes The Machine Runs Quite Stable. The Machine Adopts Automatic Glue Suppy And Recyclable Glue Circulation System. Top Or Bottom Sheet Detectors Are Installed On The Machine And The Machnes Will Automatically Stop Shile Shortage Of Sheets-Either Top Or Bottom One Is Detected All Material Are Inspected According To Iso-9001 Standard And The Key Parts Such As Gear And Bearings Are Imported. The Bottom Sheet For This Machine Can Be A.B.C.D.E.F Flute Corrugated Sheet. It Can Do 3 Or 5 Ply Board Lamination. The Range For Top Paper Can Be 150-600 G.